Spill Prevention&Control
Hopetopway
You are here: Home » Products » Water Surface Cleaner » Oil Skimmer » Oil Disc Skimmer

Floating oil skimmer is composed of oil skimmer, power station and pipeline. During operation, the oil skimmer is placed on the water, and the power station is placed on the shore or on the ship, and the two are connected by pipeline group.

The oil skimmer of Boat Oil Skimmer is of single row straight shaft rotary table group and aluminum welded casing structure. Several turntable groups with flange aluminum alloy turntables are driven by a hydraulic motor. There are two sets of oil scrapers in the rotary table set to scrape the spilled oil adhered to the rotary table into several collecting pipes and then flow into the collecting grooves. The collected oil is pumped out through the pipe at the bottom of the oil sump. The two ends of the aluminum oil sump are welded with trapezoidal left and right aluminum alloy float shells filled with foaming materials. As the float expands outward, the oil skimmer has good stability in water. The hydraulic motor is installed in the float housing at one end. There is a stainless steel pipe to reinforce the casing and act as a handle. There is a flap door on the side of the oil sump for observing its interior. There is also a handle on the side of the oil sump for lifting and tying the oil skimmer. The oil skimmer has been floated in water before leaving the factory, and the balance and underwater depth have been adjusted, which should not be adjusted in general. The counterweights can be installed under the two floater shells for adjustment.


The oil skimmer of Boat Oil Skimmer is of single row straight shaft rotary table group and aluminum welded casing structure. Several turntable groups with flange aluminum alloy turntables are driven by a hydraulic motor. There are two sets of oil scrapers in the rotary table set to scrape the spilled oil adhered to the rotary table into several collecting pipes and then flow into the collecting grooves. The collected oil is pumped out through the pipe at the bottom of the oil sump. The two ends of the aluminum oil sump are welded with trapezoidal left and right aluminum alloy float shells filled with foaming materials. As the float expands outward, the oil skimmer has good stability in water. The hydraulic motor is installed in the float housing at one end. There is a stainless steel pipe to reinforce the casing and act as a handle. There is a flap door on the side of the oil sump for observing its interior. There is also a handle on the side of the oil sump for lifting and tying the oil skimmer. The oil skimmer has been floated in water before leaving the factory, and the balance and underwater depth have been adjusted, which should not be adjusted in general. The counterweights can be installed under the two floater shells for adjustment.

The Marine Oil Skimmer is equipped with two high-pressure hydraulic hoses connecting the hydraulic motor of the oil skimmer and the power station manifold block. There is a steel wire reinforced transparent plastic hose connecting the suction port of the pumping pump and the oil drain port of the oil skimmer, which can observe the internal liquid flow from the outside; The pipe is equipped with a float to float on the water surface without affecting the balance of the oil skimmer; Both ends of the suction pipe are connected to the oil skimmer and the power station with quick change connectors. There is a discharge pipe connected to the discharge outlet of the pump.



  • DOS30 Oil Disc Skimmer
    Product Code:
    Model: DOS30
    Brief:
    Brush Oil Skimmer is a mechanical oil spill recovery equipment on water surface. It uses the continuous rotation of the rotary table in the vertical semi immersed liquid to adhere the spilled oil on the rotary table and bring it out of the water surface. Then it scrapes the oil off the rotary table with the oil scraper above the rotary table, flows into the oil sump, and is pumped away to recover the oil.
  • DOS20 Oil Disc Skimmer
    Product Code:
    Model: DOS20
    Brief:
    Brush Oil Skimmer is a mechanical oil spill recovery equipment on water surface. It uses the continuous rotation of the rotary table in the vertical semi immersed liquid to adhere the spilled oil on the rotary table and bring it out of the water surface. Then it scrapes the oil off the rotary table with the oil scraper above the rotary table, flows into the oil sump, and is pumped away to recover the oil.
  • DOS15 Oil Disc Skimmer
    Product Code:
    Model: DOS15
    Brief:
    Brush Oil Skimmer is a mechanical oil spill recovery equipment on water surface. It uses the continuous rotation of the rotary table in the vertical semi immersed liquid to adhere the spilled oil on the rotary table and bring it out of the water surface. Then it scrapes the oil off the rotary table with the oil scraper above the rotary table, flows into the oil sump, and is pumped away to recover the oil.
  • DOS05 Oil Disc Skimmer
    Product Code:
    Model: DOS05
    Brief:
    Brush Oil Skimmer is a mechanical oil spill recovery equipment on water surface. It uses the continuous rotation of the rotary table in the vertical semi immersed liquid to adhere the spilled oil on the rotary table and bring it out of the water surface. Then it scrapes the oil off the rotary table with the oil scraper above the rotary table, flows into the oil sump, and is pumped away to recover the oil.

HOME

Suzhou Hopetopway New Materials Co., Ltd

More >>
   +86-0512-66791900
   +86-15900682043
   +86-15900682043   (WhatsApp)
  +86-15900682043   (WeChat)
   No.188, Shizhong Road, Xukou Town, Wuzhong District, Suzhou, Jiangsu Province, China
© Suzhou Hopetopway new materials Co., Ltd 2021 All Rights Reserved.
CONTACT US